Registered office

Vittorio Veneto Avenue, 186

96014 Floridia (SR) Italy

Produced and packaged by Nikkolor Italia srl

in the factories of the industrial area of Palazzolo Acreide (SR) Italy.

WE INNOVATE MATERIALS BY OFFERING CUSTOMIZABLE SOLUTIONS


New generation structured nanocement, premixed composed of nano powders of marble, siliceous aggregates and natural minerals. Cemento 3D was created to create continuous surfaces without joints, with low and high thickness, ideal for exteriors and interiors. ​


The complete 3D Cement cycle is certified.

Browse the brochure Data sheet

Innovation?

For us, innovation is not a simple word thrown there at random, it's not fashion or trend, for us, innovation is life, it's sacrifice, it's hard work, it's research, it's development!

The first is the original

Since its entry into the market over seven years ago, Cemento 3D has been the innovation of premixed powder products, by adding only water to the mixture we obtain a soft and easy-to-apply paste, with nothing short of extraordinary characteristics in terms of yield, strength and flexibility.

High expectations

Over 6 cm thick in a single layer, thanks to these characteristics, in 2019 3D Cement entered the world market with a new and revolutionary application method called ROCK CEMENT©, now requested by the best architects and designers from all over the world to decorate vertical and horizontal surfaces both indoors and outdoors.

FAQ - Useful advice

  • Precautions

      Do not use on metal, rubber, vinyl, linoleum or PVC surfaces. Under unfavorable environmental conditions such as; high temperatures and wind the time of use can be very short, in these climatic conditions it is not recommended to use it outdoors. Do not use the product with temperatures below 5°C and above 30°C. After laying, protect the coverings from imminent rain, frost and high temperatures for at least 24 hours. Wet substrates can slow down the hardening of the product and weaken the application cycle. Do not expose the products to the sun or direct rain. Store the products in a dry place in the original sealed packaging.

  • Product knowledge

    Even if our application cycle provides for a single anchoring primer, it is also true that faced with some types of substrates such as screeds, parquet, wood, etc., ground floor houses, substrates subject to rising damp, etc., it is necessary to have the optimal knowledge to be able to create a solid and effective structure that lasts over time. Primer is the fundamental basis of the entire application process.

  • Blend, colors and perfect drafting

    It is always assumed that the pigments, coloring pastes or toners for coloring the products are the same. Behind each color proposed by the manufacturer there are various studies and very strict laboratory tests and it is precisely for this reason that you must first of all know the mixing of the dyes and that of the product itself.

  • Perfect success of the work

    One of the main factors for the success of a floor is not being superficial in the evaluation of the laying surfaces which affect the success of a continuous surface, the layout, the application times and the cleanliness of the rooms is essential for the perfect success of a 3D Cement floor or wall covering.

  • Maintenance and cleaning

    Let's start by saying that any type of surface is not eternal! There are some initial precautions that can prove very useful in keeping a continuous Cemento 3D surface in good condition:

Share by: